Automatic cycle
Sensor-triggered eight-second cycles with no operator skill required for consistent output.
Automatic Drive Crusher
PDS-100 Automatic Destroyer
Production throughput without a single point of failure. The PDS-100 destroys drives automatically in eight seconds, with a manual crank backup so output never stops.
Overview
What this gives you
The PDS-100 is the machine for organisations that destroy enough media every day for operator effort to become the constraint. The sensor-triggered cycle means the operator loads the drive and steps back; consistency no longer depends on how carefully the lever was pulled that morning.
The manual crank handle is the detail that makes it reliable. An automatic machine with a single motor is one failure away from a production stoppage; the PDS-100 can be cranked through a power failure, so a sanitisation line does not disappear for the day.
- Supplied, installed and supported by Quridge Global Solutions from Bengaluru
- Written quotation with GST-inclusive pricing, warranty and AMC options
- Documentation, operator training and a named point of contact for support
At a glance
What you get
Crank backup
Production continues even when the power does not.
Full 3.5 inch range
Handles high-capacity enterprise and laptop drives alike.
Measured throughput
Consistent output makes per-asset costing predictable.
Specification
Technical details
| Specification | PDS-100 |
|---|---|
| Listing | NSA/CSS evaluated |
| Operation | Automatic, sensor triggered with manual crank backup |
| Destroy time | 8 seconds automatic |
| Effect | Approximately 90° bend, motor driven |
| Power required | Mains, with manual backup |
| Drive sizes | All 3.5" including 1"–3", 0.65"–3", laptop |
| Options | Rear output slide, rack shelf, mount kit, deployment case |
Where it is used
Typical applications
The situations this is most often specified for, based on what we are asked to quote most often.
- Enterprise sanitisation lines
- High-volume ITAD processing centres
- Data centre drive destruction
- Production asset disposal operations
FAQ
Frequently asked questions
Because production stops when a machine stops. The crank lets a trained operator complete a cycle during a power failure, so a sanitisation line degrades to manual throughput instead of going to zero.
Far less than a manual machine, because the sensor triggers the cycle. We train the operator on loading, the crush area, recording the asset and the manual backup procedure.
Yes, with the optional deployment case and rack shelf. Many customers run a PDS-100 in a mobile sanitisation kit for multi-site work.
Related
Other options in this range
Need a recommendation?
Tell us your volume, media, site count and compliance requirement. We will come back with a model, a costed quotation and AMC options within one business day — with no obligation.